AquaFlow water track – maintaining

Cypress wood can turn grey over time; this is a natural process due to exposure to sunlight and rain. Do bear in mind that the appearance of the product will change slightly. If you do not want this, use a wood stain that protects the wood against UV light and moisture. 

You can also partially disassemble the water track and reassemble it later. Refer to the user manual for this and work carefully to avoid damage. 

We recommend storing the water track in a dry place after use or during winter. Dry the blue liners thoroughly and make sure there is no more water in the circuit. Allow the wood to ventilate well so it can dry. The product can be partially disassembled for storage. You will find the step-by-step guide in the user manual. 

Detach the drain, hose and filter and rinse them under the tap to remove dirt. You can clean the blue liners with a cloth and a little mild soap. Avoid scrubbing hard over the printed areas to prevent damage. Should any weather marks appear on the wood, these are best removed with a dry cloth or some mild soa

The AquaFlow water track is intended for use with clean tap water. If sand does get into the track, be aware that this can slow down or even block the flow of water. Rinse the track thoroughly after playing to keep the drain clear and the wood in good condition. 

Yes, you can order spare parts such as the pump, hoses, water containers and sluice mechanisms via the EXIT Toys webshop. This way your water track will keep going for years to come.