EXIT safety tiles

For a soft landing

Our rubber safety tiles can be used for several purposes. They are perfect as fall protection for our EXIT trampolines, GetSet play and sports units, Aksent play towers and Spinner seesaw, for example. You can also use them with other trampolines, swings, slides, and tumble bars. The tiles ensure a softer landing, as they spread the impact of a fall over a larger surface. This reduces the risk of injury. So you can let your children play outside without any worries.

Do you like sports and do you have fitness equipment in your own garden? Then our EXIT safety tiles are great as well. The high-quality anti-slip mats ensure that you have more grip on a slippery or wet lawn. You are less likely to slip and will thus be better able to concentrate on your workout.

Protect your lawn against wear and tear

By using EXIT safety tiles, you protect your lawn from wear and tear. The rubber tiles form a solid base and can also be used, for example, as a walkway or around the swimming pool. You will thus prevent worn-out grass spots caused by playing children, holes, and mud pools under the swing or at the end of the slide.

An additional advantage of the rubber safety tiles is that the grass grows through the tiles. As a result, the tiles are hardly visible after some time and you enjoy a beautiful lawn. You can go over the tiles with the lawnmower and the tiles themselves require no maintenance.

How many tiles do you need?

The EXIT safety tiles can be ordered per set of two or three tiles. Per tile, you will receive four connectors to connect the rubber tiles as you wish. The connectors keep them neatly flat and firmly in place. The table below shows how many rubber tiles we recommend per EXIT product.

Choose optimal safety

Playing safely always comes first at EXIT Toys! Our EXIT safety tiles are tested and approved in accordance with European Standard 71 (EN 71). This means that the tiles meet all safety requirements. They are shock-absorbent and offer sufficient protection up to a fall height of 1.5 metres. Thanks to the unique EXIT safety tiles, children can climb, clamber, swing, and tumble outside without a care in the world.

How do I place the safety tiles?

First determine where the safety tiles will be located and excavate the ground 45mm deep at this spot. Make sure the ground is completely flat. After this, place the tiles and firmly fill in the soil against the outer edges of the tiles for stability. Finally, fill in the gaps of the rubber tiles with soil and sow the grass. When the grass has grown sufficiently, you can mow it by going over the tiles with the lawnmower.